1
2
3
4
5
6
7
8
1

Class D Amp & ESS Hi‑Res DAC
The 215 Watts  Class D amp pairs well with a wide variety of speakers

2

Tube Preamp
Our famed tube preamp comes with the superb JJ ECC99 as standard issue.

3

Outputs
1 x speaker pair on 5-way binding posts
1 x mode-switchable pre/line out (for  subwoofers or active speakers)

4

6 Inputs
1 x Optical TOSLINK
1x Coax SPDIF
1 x Bluetooth AptX HD
1 x Vinyl
2 x Analog RCA

5

Headphone Amp
Built around the TI OPA1622 chip, rated at 142mW@32ohm

6

Source Select
6 ways to enjoy your music. Push to easily pair with any Bluetooth device

7

Smart Volume
Turn up to turn on. the motorized knob sets amp to sleep mode at zero volume.
Auto shut-off after 30 minutes of silence.

8

Updatable Software
Future-proofed update via USB

Billie Integrated Stereo Amplifier | Features & Specs

Good Vibrations

Billie features a custom tube preamp, ICEpower amplification, ESS Hi-Res DAC, AptX Bluetooth, coax, optical, analog and phono inputs. At 215W per channel, there’s enough power to drive any speakers.

While many technological products are made with planned obsolescence in mind, Billie is designed to withstand the test of time. No matter where the technology goes, you will always have a reliable amp with relevant inputs.

Speaker Pairing: Billie pairs beautifully with most speakers with sensitivity of 85dB and above, and impedance of 4 to 8 ohms. High impedance speakers, like the Zu DW6, are not recommended. For questions regarding speaker pairing and recommendations, don’t hesitate to contact us.

Proudly made in Montreal, Canada, Billie offers performance way beyond its price. Parts include a machined aluminium chassis and hand finished walnut knobs.

A 5-year warranty comes standard.

The features described herein are for the current model, Billie MK2. Billie MK1 specs can be found here.

Technical Data

Amplifier

Class D | ICEpower 200AS2
215W 4Ω |120W 8Ω
[Watts per channel, RMS. Recommended speakers 4Ω-8Ω, +85dB sensitivity]

Preamp

Class A Mu-follower
2 x ECC99 tubes [12BH7, 12AU7 compatible]

DAC

192KHz | 32bit
ESS SABRE32 ES9018K2M
HI-RES, HD AUDIO compliant

3 Analog Inputs

1 x vinyl [MM phonostage]
2 x RCA line inputs

2 Digital Inputs

1 x TOSLINK optical input
1 x S/PDIF coax input

1 Wireless Input

1 x Bluetooth aptX HD|AAC|A2DP

Speakers Out

1 X stereo speaker terminals
[accept bare wire, banana plugs, 8mm spade connectors…]

Pre/Subwoofer Out

1 x volume-controlled PRE OUT [used for subwoofer, auxiliary amp pre or active speakers]. Switchable to full-volume LINE OUT

Headphones Out

1 x 1/8″ [3.5mm]
Using TI OPA1622
142mW@32ohm

Voltage

110-120V 60Hz or 220-240V 50Hz
[factory configured dongle]

Dimensions

14.25″ x 8″ x 3″
360mm x 204mm x 75mm
[L x D x H excluding tubes]
[Aprox. height with tubes: 5-3/8″ | 135mm]

Weight

12 lbs. net | 13 lbs. shipping weight
5.4 kg net | 5.9 kg shipping weight

More Features

.Tube-Saver auto shut off after 30 minutes of silence.
.Vinyl 4dB boost jumpers for low-gain MM stylus (2-3mV).
.PRE OUT switchable to LINE OUT mode for recording, ripping, etc.

Accessories

Power cord
Manual
Remote

Warranty

5-year, parts & labour

VIP Waitlist Get notified as soon as this product is back in stock. Rest assured that your email address won't be shared with anyone else -ever.