Billie Integrated Stereo Amplifier | Features & Specs
Billie features a custom tube preamp, ICEpower amplification, ESS Hi-Res DAC, AptX Bluetooth, coax, optical, analog and phono inputs. At 215W per channel, there’s enough power to drive any speakers.
While many technological products are made with planned obsolescence in mind, Billie is designed to withstand the test of time. No matter where the technology goes, you will always have a reliable amp with relevant inputs.
Class D | ICEpower 200AS2
215W 4Ω |120W 8Ω
[Watts per channel, RMS. Recommended speakers 4Ω-8Ω, +85dB sensitivity]
Class A Mu-follower
2 x ECC99 tubes [12BH7, 12AU7 compatible]
192KHz | 32bit
ESS SABRE32 ES9018K2M
HI-RES, HD AUDIO compliant
3 Analog Inputs
1 x vinyl [MM phonostage]
2 x RCA line inputs
2 Digital Inputs
1 x TOSLINK optical input
1 x S/PDIF coax input
1 Wireless Input
1 x Bluetooth aptX HD|AAC|A2DP
1 X stereo speaker terminals
[accept bare wire, banana plugs, spade connectors…]
1 x volume-controlled PRE OUT [used for subwoofer, auxiliary amp pre or active speakers]. Switchable to full-volume LINE OUT
1 x 1/8″ [3.5mm]
Using TI OPA1622
110-120V 60Hz or 220-240V 50Hz
[factory configured dongle]
14.25″ x 8″ x 3″
360mm x 204mm x 75mm
[L x D x H excluding tubes]
[Aprox. height with tubes: 5-3/8″ | 135mm]
12 lbs. net | 13 lbs. shipping weight
5.4 kg net | 5.9 kg shipping weight
.Tube-Saver auto shut off after 30 minutes of silence.
.Vinyl 4dB boost jumpers for low-gain MM stylus (2-3mV).
.PRE OUT switchable to LINE OUT mode for recording, ripping, etc.
5-year, parts & labour